Mounting structures
Built to Last. Mounted for the Long Run.
The mounting structure is critical for long-term solar reliability. Height, material and fixing method should be selected from the roof type, wind exposure, tilt requirement and structural capacity of the site — by survey, not by a generic catalogue promise.
Free quote
Get a personalised estimate in 3 steps
- 0.5 Meter Structure: Low-profile arrays on roofs where headroom, wind exposure or appearance need a compact stand-off.
- 1 Meter Structure: A common mid-height option that balances tilt, walkway clearance and typical RCC or metal-roof layouts.
- 2 Meter Structure: Taller stands where more clearance, different tilt geometry or ground-level walk-under access is required.
Benefits
- • Professionally engineered for the site, not a one-size stand
- • Specified with the roof or ground condition in mind
- • Durable hardware intended for years of outdoor service
0.5 m stand-off
0.5 Meter Structure
Low-profile arrays on roofs where headroom, wind exposure or appearance need a compact stand-off.
- • Lower visual profile
- • Shorter lever arm in wind
- • Useful where roof access is tight
1 m stand-off
1 Meter Structure
A common mid-height option that balances tilt, walkway clearance and typical RCC or metal-roof layouts.
- • Practical access under the array
- • Flexible for many residential and commercial roofs
- • Widely used site default
2 m stand-off
2 Meter Structure
Taller stands where more clearance, different tilt geometry or ground-level walk-under access is required.
- • Greater clearance beneath modules
- • Suited to selected commercial or ground-adjacent layouts
- • Specified after structural review
Heights are typical product families used to discuss clearance and geometry. Final structure, steel grade and fixings follow site survey and structural checks. We do not quote a guaranteed calendar lifespan independent of the site.
Choose solar in 4 easy steps
1
See your savings
Enter your electricity bill. Get an instant solar estimate.
2
Talk to Mr.GLOW
Book a free consultation. We walk through your numbers.
3
We survey & design
Site visit, system design, and a clear proposal.
4
Install & start saving
Installation, net metering support, then monitoring and service.
What is Mr.GLOW RENEWABLES?
Mr.GLOW RENEWABLES PVT LTD installs rooftop and related solar systems for homes, businesses and industry from Hyderabad. We survey the site, propose a price, and install after you confirm.
What is a rooftop solar system?
Panels on the roof generate DC electricity. An inverter converts it to AC for your loads. On-grid systems can export surplus through net metering where your DISCOM allows it.
How do I size the plant?
Start with your monthly bill in the calculator. Final size depends on roof area, shade, sanctioned load and your goals. That is confirmed at survey — not from the website estimate alone.
Is government subsidy available?
Central rooftop subsidy for eligible residential systems is administered under current government rules (often discussed as PM Surya Ghar). Eligibility, slabs and documents change. We help you check what applies to your site; we do not guarantee an amount on this website.
How long do panels typically last?
Quality modules are commonly warrantied around 25 years for performance. Actual generation depends on product, installation, weather and cleaning. Warranties are those of the manufacturers named in your proposal.
Are website savings a quotation?
No. Calculator and subsidy figures are estimates. Price, taxes, net metering and timeline are in the proposal after survey.